The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Is this phantom knock?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chronicvex

10+ Year Contributor
189
0
May 29, 2008
Crofton, Maryland
One of my old cruise logs.

I have the same issue even on stock tune. I'm not running lean. I have wideband hooked up. Sometimes it even happens when im not in gear and I rev it a tiny bit. I get a couple counts of knock on a hot day under WOT which I suspect is also because I havent put on my FMIC yet, but otherwise its when it is barely under any load. If it is phantom knock, i'd like to adjust the knock sensitivity. In ceddymods it says "Knock below load sensitivity = 16 and knock above load sensitivity = 32" What should I try changing this to so that I will only see true knock?

Any input is appreciated.
Thanks
 
One of my old cruise logs.

I have the same issue even on stock tune. I'm not running lean. I have wideband hooked up. Sometimes it even happens when im not in gear and I rev it a tiny bit. I get a couple counts of knock on a hot day under WOT which I suspect is also because I havent put on my FMIC yet, but otherwise its when it is barely under any load. If it is phantom knock, i'd like to adjust the knock sensitivity. In ceddymods it says "Knock below load sensitivity = 16 and knock above load sensitivity = 32" What should I try changing this to so that I will only see true knock?

Any input is appreciated.
Thanks

First things first, have you inspected your knock sensor? Chance is that it's bad. They usually have black ooze coming out of it when they go bad. I had the same issue as you, and it was the knock sensor. You will go crazy trying to adjust this and that and trying to find a way around the problem, but you will FAIL LOL.

...and even if you adjust the sensitivity of it to where it doesn't pick up this random knock, what if you are knocking and it's not picking it up? Inspect it first, and go from there.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 4G63 NEW Stop Tech Drilled And Slotted Rotors
    New Stop Tech Drilled & Slotted Rotors $70 + shipping and paypal fees* FITS * Eclipse GST...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top