The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Engine Stutter/Tach Dropping Off?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sik4g63

10+ Year Contributor
680
0
Jun 1, 2008
b town, West Virginia
What would cause the engine to "stutter" or kinda stall while driving. At the same time my on my tach the rpm's would drop to dead nothing then pick back up to where it should be. This has happened to me almost everytime i drive it. It mostly happens while at a good cruising speed around 55-60mph. Any clues or suggestions would help.:dsm:
 
Hey bro i was kinda having the same prob with my car, then it got worse and worse.. i endend up crackin' the head on my 1g now im going to do a full rebuild with a 2g head and my 6bolt main...
have ## head checked out it might be the prob
 
What would cause the engine to "stutter" or kinda stall while driving. At the same time my on my tach the rpm's would drop to dead nothing then pick back up to where it should be. This has happened to me almost everytime i drive it. It mostly happens while at a good cruising speed around 55-60mph. Any clues or suggestions would help.:dsm:

Does the CEL light come on at the same time and then go off right away?

Do you have a 2.0L NA or a 1.8L?
 
i have a 2.0 n/t, and no the CEL doesnt come on. I have had my mechanic hook up to it to see if it would throw out any codes that might lead to that prob. the head has only bout 20k on it and it has been ported and polished. but i have looked around the head to see if there was a visible crack or leak from it and its clean from what i can tell.
 
IF i have to swap ECU's would one from a junkyard work fine? Or should i try to find a semi new one? Any help would be appreciated since i am new to the DSM world, i have came from JEEPin and the offroadin world....so i dont have much experience with these cars.
 
You might get lucky but keep in mind (and try searching here) that the capacitors going bad is a generic problem with Mitsubishi ECUs from the mid 80's up to the start of the OBD II ECUs in 95.

Unless the capacitors have already been replaced they have either already leaked or will. Anything you get from a junk yard is just going to be questionable.
 
So would you say that the ECU needs to be replaced?

It should be checked and if damaged, repaired or replaced.
There are still lots of things that could be cause your problems. The ECU issues are common so eliminating that variable first makes sense.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Latest Classifieds

  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
Back
Top