The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Advancing/ Retarding Ignition Timing Information

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

xlMcMlx DsM

15+ Year Contributor
276
2
Nov 7, 2005
Madison, Wisconsin
My Powertrain Management teacher isn't too in tune with his ignition timing and how it affects power. And I'd like to read up on it some more. I searched around here, but couldn't really find much on the effect of advancing or retarding. I have a basic understanding, but If anyone happens to have a link to someplace that has lots of info on ignition timing, It'd be appreciated. Or someone who is 100% positive they know, can write a good, detailed description of their knowledge. Thanks.
 
Remember riding a bicycle? Remember the time you tried for the coaster brake while the pedals were up-and-down, and not being able to back-pedal to use them? The pedals are your pistons. For a fair bit of the crank's rotating -oh, twenty degrees or so- at both top and bottom of the stroke, they're barely moving.
Burning the fuel -I hope your instructor has drilled-home that it's burning and not exploding- takes time. Starting the fire as the piston's coming "up" -advancing the spark timing- while it's still in that "dead space" makes sure that the most heat energy is being imparted to the piston just at the point where it'll carry the most power to the crank, just like you press hardest on the pedal on a bike to get up a hill, in the range from about 30°~150°.
As the crank speed increases, and piston and valve events speed up, the burning speed of your fuel doesn't much change (all under the influence of compression ratio, engine and combustion chamber temperatures, and, of course, "stuff"), so in order to have the most energy conversion at that sweet spot in the crank position, timing has to be advanced.
This is interesting enough at 750 RPM. It gets more interesting at 7500. And god knows what is going on inside motorcycle and F1 engines that are turning 20,000 RPM.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top