Clutch &pedal problem HELP!!!

eclips3_xs · 08-20-2008, 08:31 PM

Hers whats up with my clutch. I dont know if its the slave cylinder or clutch. I bleed the clutch the pedal gets hard which is ok because i got a act max extreme clutch kit with a street disc. After a while of driving the pedal becomes softer and the gears go in hard or dont go in at all. Plus is it normal for act clutches to grip 1/4 from the floor or something is wrong. I keep adjusting it but no use. And i been working on this for days and its disturbing pissing me off.

ryan90 · 08-20-2008, 08:52 PM

did you adjust the master at the floor?

vfaq has an article titled "adjustment" in the drivetrain section.

rs6bolt92laser · 08-20-2008, 08:56 PM

Have you had some one push your clutch in and and then see if you slave bleeds off

vancitydsm · 08-20-2008, 11:45 PM

I would assume clutch master dude, Id get a better one. The stronger your pressure plate the more stress on the clutch master.

Locke · 08-21-2008, 12:03 AM

If bleeding stiffens pedal feel, but then slowly goes soft again, you have a leak. Find it and fix it before you burn you clutch.

eclips3_xs · 08-21-2008, 06:59 PM

Yeh seems like that's the problem ok thanks guys.