Manisfold Question

[dsm_Prince]

I have a question about manisfolds. I know that 2g automatics bring a smaller turbo than a 5-speed, so does this mean the manisfold is also smaller on the automatic? Im asking because i baugt an engine off tiger japanese and it came from an automatic car so i switched of turbos but left the manisfold from the automatic. My check engine light is on so i hooked my OBD2 code reader and it threw out this code p1105 i didnt find it in the manual so i just looked up p0105 and it read "manisfold absolute pressure/Barometric pressure circuit malfunction". Is this a problem and is that the code im suppose to be looking at?

 

[GSX26]

2g Autos and 5spds have the exact same turbo and manifolds. 1g autos and 5spds have different turbos, but same manifold. Why did you look up a code that you didn't throw? P1105 shows up as fuel pressure solenoid valve. Check that and see if that fixes it.

 

[b00stedtalon2]

For 1, its spelled manifold, not manisfold.

All 2g turbo vehicles have the same turbo/manifold, there is no difference.

Your code is for the MAP sensor. It is the sensor that is bolted to the top of the intake manifold. Make sure it is plugged in. If it is, it may need replacing or its wiring might be bad.

 

[1992awdlaser]

As already said 2g's are the same. It is 1g's that come with a smaller turbo on the auto.

The code is likely for the sensor on top of the intake manifold that is held in with two bolts. It is called a manifold differential pressure sensor(mdp). It is part of the egr system.