[RESOLVED] head gasket

[914g63gsx]

OK my head gasket went and i am at a loss of which one to get. the thing is i had a cometic head gasket and it was leaking pushing coolant. put a new one on i think a fel pro cant remember but i ran outta gas and put gas in it took off and bang their goes my gasket. but i never had a prob with this one. so which one would you guys recommend i need some opinions ### i am gonna order it with in the hour. now keep in mind i bought the car with the cometic leaking the kid reused the old head bolts i now have arp studs. i know its long but i didn't feel like taking it apart again in a month.

 

[wolfe06]

You should go with a mitsu four layer headgasket. they have worked best for me

 

[outkastracing]

thats what i got a 4 layer metal one works great!

 

[dimon2000]

if you dont want it to keep blowing make sure you resurface the head since its aluminim and make sure you use your arp head studs and torue to spec.

 

[914g63gsx]

k thank for the replies now were can i get a 4 layer i have looked on extreme psi.com but only found the 3 layer cometic .?

 

[z24frank]

dsmparts.com or your local mitsu dealer of course!