AFPR and boost gauge

[crimsondragon]

I'm looking to upgrade the fuel system this summer and I just thought of something. If I get an AFPR with SS lines and AN fittings, where do I hook my boost gauge to? I have it hooked on the stock FPR to manifold line at the moment.

 

[Mr Peepers]

The SS line and AN fittings are just for the fuel lines, it will still have a reference port nipple for a vacuum line.

 

[crimsondragon]

Nice. Thanks for the reply.

 

[andy4g63]

That is not the place to hook a boost gauge anyway. Find some other source like IM for example.

 

[steve]

That is not the place to hook a boost gauge anyway. Find some other source like IM for example.

That is from the IM. That hose runs from the IM to the FP Solenoid if you still have one to the FP regulator. The boost gauge is usually tapped into the line just before the FPS because the factory lines had a coupler right there you could pull out and replace with a tee.