fp3052 w/o other stuff

[dsmerjosh]

I was wondering if anyone has bought the fp3052 or fp3065 and what all they had to buy to make it work. I wanted to know if it was possible to buy the turbo for 1400 ballpark without having to buy all the other stuff? Will it only work with the lines diff o2 housing etc

 

[Asimmons90GSX]

Your gonna need the other stuff. Makes it easier anyway than piecing it together. Just call FP and talk to them about everything and they'll help you out.

 

[blcknspo0ln]

You need a vband o2 housing and a vband tial gate, among the standard oil lines.

 

[TrboANTsi]

vband o2 housing
tial 44 or 40mm WG not sure which one though i forgot.
dump tube add on to the o2
fp intake or something to meet up to that 4inch inlet
oil lines with filter

 

[demografik]

and those things are just to make the turbo bolt on, and car start up. to make it run well at all, you'll need quite a bit of supporting mods. your 14b will take you to 300whp, there's no reason to upgrade your turbo now. spend that 1400 on maintenance, bolt-ons and fuel and you'll make more power than you ever would with JUST a 3052.

 

[dsmerjosh]

demografic have supporting mods, stage 3 shep, 780 pte injectors, 255walbro, 2600 clutch, dsmlink, etc.

 

[10secclub]

i ran a 3065 for awhile and i spent around 1600 for everything to make it work i liked it but decided to go bigger for the stroker

 

[Asimmons90GSX]

The 3052 should support around 500-550 whp with the supporting mods like you have. I would step up to 1000's.

 

[50trimmed1g]

You'll definitely need some big injectors with that fp30. My buddy was maxing his 660's out on like 19 psi or so.

 

[Evo8MRdude]

Unfortunately you wouldn't be able to finish your project for just $1400, you will fall short on the tial, the o2 housing,the oil lines, the in-line oil filter and some minor hardware.

For that price the Green will be a bolt- on nd should fit the bill but for everyone running the FP3052 any of them will tell you that the extra money to get the entire FP3052 kit is well worth(tial,in-line oil filter,o2 housing, etc)

Go for it.

 

[Evo8MRdude]

You'll definitely need some big injectors with that fp30. My buddy was maxing his 660's out on like 19 psi or so.

I am running 680 cc precision injectors at 25psi of boost(FP3052) and methanol and my setup works fine. It does not break a sweat, I am also running on 91oct gas.

 

[ILLiCliPSE]

Im running 18-19psi on my 3052 with FIC 850s and my IDC hasnt reached over 56%.