The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

[RESOLVED] moving oild pressure

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Executionerhk

15+ Year Contributor
130
0
Feb 21, 2008
Topeka, Kansas
i don't know if it is normal...
when i am not driving my car... or after driving it...
stock oil pressure guage read 1/3 to the Low side... which i think it is low...
and when i push gas... it will go back to the first line right at the handle of the oil container logo. which supposing to be normal...

is there anything wrong?
also i am about to do an oil flush...
is that drain the old oil and then put some cheap oil let the engine idle for 10,15min
drain those oil and put in new oil?
should I keep the old oil filter first and then when I put in the good oil, put in a new oil filter?
 
being below the bottom mark is ok when at idle , as the motor increases in rpm's it causes the oil pump to pump harder which will cause the oil pressure to rise , as far as doing a oil flush I would change the filter each time you change the oil , just by cheap filters. At most of your local auto parts houses they sell commercial oil filters for their local shops that they service and at a hella reduced rate i.e. fram $5.30 their commercial filter $1.35 all you have to do in most cases is just ask for one of these filters and they should hook you up. hopefully this helps
 
are you serious?
and there is nothing wrong huh...
this is good...

hey do you know a thing or two about compression test?
i want to find the MPI fuse but no one help...
 
I would suggest picking up a Chiltons manual for your car. It will tell you where everything on the car is and tell you how to perform a compression test on the car.
 
its hard to explain some of this stuff without doing it well atleast it is for me your best bet on finding that fuse is to go get the manual your gonna need it for other things in the future anyways I promise hahahaha
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top