1g-2gmaf intake pipe

[mikh338]

hey guys
so i have a 2g maf for my 1g, i am about to buy this intake pipe from dejon tool and want to make sure it is going to fit. Now I am running a punishment racing shourt route fmic setup. The intake pipe is 4" so I want to make sure it will clear the shourt route piping. Here is a link and the pipe I am looking at is model CIP-1gS
DEJON | Powerhouse
thanks guys
mike

 

[Auto RS T]

I don't have hands on experience with the Dejon intake but it looks like it will fit. The only problem you may have is with the coolant overflow tank. Running the PR FMIC kit you will most likely have to move it anyway. You can see from looking in my gallery that the pipe itself is well above where the intercooler pipe goes through the engine compartment.

 

[mikh338]

anybody else?

 

[Mr Peepers]

I've run that intake pipe on my 1g with a 2g MAS, although it wasn't the 4" style. It was pretty compact and you couldn't really ask for any more clearance with short route piping without compromising flow.

 

[mikh338]

I've run that intake pipe on my 1g with a 2g MAS, although it wasn't the 4" style. It was pretty compact and you couldn't really ask for any more clearance with short route piping without compromising flow.

what size was the pipe you ran if it wasnt the 4"

 

[OakStreetTuner]

I have the 3'' Dejon pipe on my car and its a really tight fit, I can't imagine trying to fit the 4''

 

[mikh338]

I have the 3'' Dejon pipe on my car and its a really tight fit, I can't imagine trying to fit the 4''

so stick to the 3" then? and what filter do you run since you have popup lights as well, you know how crammed that area is when it comes to fitting aftermarket pipe\filter in

 

[mikh338]

nvm you are running the gm setup

 

[Mr Peepers]

what size was the pipe you ran if it wasnt the 4"

2-3/4" I believe, whatever fits the TD05H compressor inlet.

 

[mikh338]

2-3/4" I believe, whatever fits the TD05H compressor inlet.

im gonna do the 3"intake i think that should fit

 

[Mr Peepers]

If not, you're a certified welder, right?

 

[mikh338]

If not, you're a certified welder, right?

haha yes i am