evo FMIC on a 2g

[GSXdsm97]

ok so i know this has been posted about 8 million times....but, its not just about an evo FMIC. I was wondering what pipe to run off my stock turbo to get to the drivers side. thanks. o and by the way its a T-25

 

[absolute_DSM]

Just for future reference, let us know what your spool up is by RPM before and after the install.

And I havent really looked at the Evo FMIC that much, but shouldnt you be running that tubing off the turbo to the passenger side?

 

[Black95awd]

Evo FMIC is hardly worth it. but if you must........ the best way to do it is to have the compressor outlet cut off and turned around. I cant remeber what there might be for clearance issues, its been a few days since I have had a t25..

 

[cruisintalonawd]

I would do that or have a straight piece welded on then just run the piping the long way or the short way

 

[GSXdsm97]

well the only reason i am doing the evo FMIC is because i got it really cheap.as for the spool ill let you know as soon as i get it on. but i still dont know how i am going to come off the turbo and shoot it out the other way

i might get a U-J pipe or what ever its called from xtremepsi

 

[95CarbonEclipse]

J-Pipes are for turbos that route the piping upwards, unlike the T-25. The J-Pipe routes it back down to where your T-25 piping is currently at so that you can use your current SMIC. Other J-Pipes do the same thing but are angled in the direction of the drivers side. Either way, it's not going to do you any good on a T-25 turbo.

The best thing to do would be cut the T-25's compressor housing pipe off and then just get a 90* coupler (or re-weld the bend section so that it faces towards the drivers side).

 

[Hideki]

Dejon sells a "U" pipe for the T25 when you're using a front mount (so you don't need to cut your T25 elbow off) If you check out how Dejon routes their pipes you'll probably find your answer

 

[GSXdsm97]

ok thanks ill check it out, the pipe i was talking about was like a U pipe with a little angle on it than a straight pipe all connected

 

[BoostedinSoFla]

Forget about Dejon, take a look at ETS's dsm intercooler piping section. Their "U" Pipe is only $65. Pics below....2nd pic is a custom job, not the ETS pipe but is there for reference to show you how it is installed.

 

[GSXdsm97]

thats sweet thanks. i was gonna try and use the same route for the passangerside but i guess i shouldnt, also i was looking at the dejon FMIC kit they sell everything for it, i emailed them and asked the size and if it came with the u-pipe

 

[meliketoball]

Damn! That SSQV vacuum line must be 5 feet long!

 

[GSXdsm97]

how did u mount that beast. did u extend the side mounts