4g63 n/a and 4g63 turbo blocks

[Needsoles]

What is the difference between the non turbo 4g63 block and 4g63 turbo block? Will the internals out of a turbo motor work in a non turbo motor?

 

[awdtalon21]

the turbo block has oil squirters under the pistons, and the pistons are different in the n/a

 

[nicks99eclipse]

if its like my friends honda *not saying dsm are anything like them but still* he had a turbo engine with no turbo and it ran good it just didnt have much power...dont know if that helps any

 

[NN4S]

The differences between the two are varied, oil squirters and lower compression pistons (7.8:1 compared to 9:1) in the turbo engine are the main ones. The NT block still has the mounting point for the knock sensor (you may have to chase the threads with a tap to use it). The lack of oil squirters is unlikely to be a problem if you use aftermarket forged pistons; I've gotten away with using stock 2g turbo pistons in a lower boost application (no more than 15 PSI) in an NT block without seeing any damage yet.

 

[HITT1]

like NN4S said, it would be the compression, the cams, pistons. The N/A block has the same crank and rods as the turbo block.

 

[Needsoles]

will my parts fit cause my turbo block is no good anymore so i was seeing if i could run my internals and a turbo on it

 

[90laserRSfwd]

are you suggesting putting a non turbo bottom end into your turbo car or just the block itself?

 

[dsmfa9nutter]

will my parts fit cause my turbo block is no good anymore so i was seeing if i could run my internals and a turbo on it

Yes, you can take the internals from the turbo 63 and put them in the na 63 block.