removing oil feed line with turbo on car

[Kyle97turbo]

Has anyone ever successfully removed the oil feed line from a 16g turbo with the manifold and everything still on the car. I need to replace the crush washers but don't want to risk the chance of breaking another manifold stud. If you have please tell me what you used. Thank you

 

[BUCK]

Pull your Radiator first, as any sane DSM driver will do for almost ANY repair evolution there up front - Good luck.

 

[timloomis]

Exactly, take out the radiator first so you can get a box-end wrench in there for that banjo bolt.

 

[ktmrider]

There is also a small bolt holding the oil and coolant feed lines on the block side of the turbo, very hard to reach ( nearly impossible ) if not separated from the manifold.

 

[Kyle97turbo]

Thanks for the idea. Never thought about that.