help with finding parts

[turbizzle]

I have recently came upon a 2.3L stroker motor. I have found where to buy most of my parts, but I haven't found a good place to purchase a throttle body. The previous owner of my car lost the idle adjust screw and plugged the hole with jb-weld. I found out about this problem when I did a fuel injection cleaning. I had no way to lower the idle after the service and now I have over-heating issues in the summer and a severe hunting idle. I've talked with my master tech and we have come to the conclusion that a new throttle body or adjustment screw would solve the problem. Now the problem with that is the local dealership wants around 800 hundred dollars for an OEM and junk yards posses no dsm in my area. So now I've hit a roadblock and proceed foward. Any help with this would be much appreciated.

 

[throwedgsx]

You can get a 75mm Mustang throttle body at fftec.com but it's still gonna cost ya $400. Otherwise you can get a new idle set screw at extremepsi.com

 

[AndrewD5418]

You can just get a throttle body from ebay or a local parts whore.

 

[Nicks2319]

1g throttle body should be easy to find on ebay or the classifieds for less than $50.

DSM Trader hosted by DSMsource.com - 90-99 1g 2g Eclipse Talon Laser Dsm Turbo Oem and Performance Parts! Look This Is Huge!

DSM Classifieds - Message - Powered by PhotoPost Classifieds

they both have one

 

[turbizzle]

Thanks for the help guys, advice is always appericiated!!