EvoScan - Does anyone use it??

[mattspyder]

evo scan 2.1 is out, I ordered this about a month ago, I havent received the email update yet???

[jcurcillo]

If you use email providers like Yahoo it would have been filtered into your junk mail. Check your spam. It should be there. It went out yesterday.

Apparently it works with 94-97 you just need to lower the baud rate. I got this from a post by Linksys42: "It has always supported all 2g’s the reason why people cant get it to work is because they are trying to connect at too high of a baudrate. Only 98 and 99 ecu’s that are Mitsu H8/500 ecu’s can log data at the baudrate 15625 that evo 8 and 9’s log data at.
On 95-97 they have to adjust the baudrate too 1953."

[mattspyder]

thanks for the help, but i checked my spam folder and it wasnt in there. I sent evoscan a email asking them to resend it.

[TSI_Pimp]

Originally Posted by jcurcillo

If you use email providers like Yahoo it would have been filtered into your junk mail. Check your spam. It should be there. It went out yesterday.

Apparently it works with 94-97 you just need to lower the baud rate. I got this from a post by Linksys42: "It has always supported all 2g’s the reason why people cant get it to work is because they are trying to connect at too high of a baudrate. Only 98 and 99 ecu’s that are Mitsu H8/500 ecu’s can log data at the baudrate 15625 that evo 8 and 9’s log data at.
On 95-97 they have to adjust the baudrate too 1953."

If this is true is there anyone that can confirm this?

[JrCRXHF]

Originally Posted by TSI_Pimp

If this is true is there anyone that can confirm this?

What bit rate for a 1g

[98GSXtreme07]

I'm not sure if any of you 1g and pre-95 guys have looked at the website lately but now they have the cable you would need to support EvoScan. Here's a quick link:

Mitsubishi OBDII DataLogger - EvoScan

[jb2zero0six5]

So has anyone re-flashed their 98-99 ECU yet? I'm saving for a laptop right now! Around here in my town people don't know what a logger is, I swear.

[97GSTAUTO]

For you 97 2g people out there if you have any questions let me know. I got mine this weekend. Havent had a chance to do much but I can say that it does work for 97's. It logs knock voltage, it works at the higher baud rate, and I think thats all of the questions I saw.

[kenamond]

Originally Posted by 97GSTAUTO

For you 97 2g people out there if you have any questions let me know. I got mine this weekend. Havent had a chance to do much but I can say that it does work for 97's. It logs knock voltage, it works at the higher baud rate, and I think thats all of the questions I saw.

What sampling rate? For example, I could get 10-11 samples per second on my pocketlogger. Any numbers for EvoScan? What about other things like LTFT Lo/Mid and IDC?

[jcurcillo]

I know those things work on my 98.

[97GSTAUTO]

Originally Posted by kenamond

What sampling rate? For example, I could get 10-11 samples per second on my pocketlogger. Any numbers for EvoScan? What about other things like LTFT Lo/Mid and IDC?

It logs pretty much everything you need and dont need. As far as sampling rate I havent done any logs with my "Real" notebook just one I bought to use with the wideband (p3 600). I'll do that tomorrow morning also. Would do it today but today is a busy day for me. If I get back home in time I'll post a log so everyone can see what gets logged.

[kenamond]

Originally Posted by jcurcillo

I know those things work on my 98.

Thanks! What's weird is that it shows three LTFT values (Lo/Mid/High). I thought 2gs (and 1gs) only had two LTFTs. And it shows the exact same value in your image for all three. Wonder if they are actually the three different LTFT values, or it's just replicating the current LTFT. I like the name of STFT (Oxygen sensor feedback trim)...good description.

Of course, that's from a '98 (unless you have a different ECU).

[98GSXtreme07]

Here's a picture of when I was actually driving the car and datalogging. There's a function column and than a reading column. The reading column s actually what its logging at that particular time. The function is just that. It is a formula that EvoScan uses to calculate all of its parimeters. I know your asking for a 97' but i thought this might help you somewhat. I wish i could make the picture bigger so its easier to see but i understand rules are rules.

[srtkiller]

Has anybody used this on the e-prom yet if so please say something. I am very interested in buying this.

[mokstuning]

wohw ... that i like .. let me know guys .. how will it works ...

[kiddsm95]

Has anyone tried using Evo Scan with the Multiplex OBD2 translator hooked directly to a laptop? I think this would work, but would just result in a slower sample rate. Can anyone with ES and a MP X-lator confirm this?

LMK.

[97GSTAUTO]

Dont believe so. I think it only will work with a Tactrix type cable. Goto Main Page - OpenECU to find out.

[Morpherex]

So nobody has tested to see if this works on a 1g yet?

[98GSXtreme07]

I'm not sure if anyone has but it should work though since they now have the cable that supports the 1gs.

[greddy_1700]

So, any new discusion about this program? I see that you posted the screen shot of it working, but does it show a graphical display that is eaiser to read quickly? Also does it actually detect knock? I am ready to get it for the spyder and I plan on uping the boost, but I want to tune for 0 knock.

[97GSTAUTO]

Originally Posted by greddy_1700

So, any new discusion about this program? I see that you posted the screen shot of it working, but does it show a graphical display that is eaiser to read quickly? Also does it actually detect knock? I am ready to get it for the spyder and I plan on uping the boost, but I want to tune for 0 knock.

You can set up gauges (and make your own too) so that they can be used to display perameters in real time. Or you can graph in real time also. Both of which can be used to replay your logs. No it doesn actually detect knock. Only DSMLINK can do that. But it is a good alternative. The only problems I have had with it is my sample rates were slow. About 4 per second sampling 15 data items. I thought it was because of the laptop (p3 600) so I switched to my main laptop (core 2 duo t7700 (2.4)) it was the same. I think it was because of vista ultimate. I bought another laptop ( p4 2.4ghz) and using a keyspan multiport adapter and sampling all available data items and I get 8 samples per second. So Im going to trim some of the fat and see what sample rat i get. I emailed them about the issue and they were stumped. They said I should be getting somewhere around 70 - 80. Im going to play with the serial port settings to see if I can speed things up. Anyone else running evoscan with higher sampleratee then me please chime in.