Turbo timer not timing anymore

[eboy0]

All was well until about a week ago, my car got hit with some heavy rain.

Now for some reason the timer won't time. It just turns off with the ignition, it doesn't lose power, it says 'OFF' and just turns off.

Is there anything that could have gotten screwed up from the rain.

I'm using the 2g harness so its just plug n play. I don't know what could be wrong, car runs fine.

 

[RedTurboEclipse]

Greddy? You try turning it on? Sometimes people forget, when first installed or massive reset for some reason, it will default to off.

Using the wiring harness, you still need a separate ground wire though right? (I have installed one with the wiring harness, but forgot). If so, check to make sure the ground did not come loose.

 

[eboy0]

Its a full auto greddy.

What's weird, now when I crank the car over, it's default is P-1, which begins to count up, like i have it set to 1 minute, I start the car, and it'll start counting up to no end.

It turns on fine, all the features that it has work fine except the timing one.

Ground is good aswell.

 

[eboy0]

Could something be wrong with the ECU/Ignition?
A fuse perhaps, anything? I really don't want to deal with greddy RMA(if they even have any) unless I know it's the timer..

 

[Black91TSiAWD]

Mine recently stopped working as well, but its an HKS.

Its a plug and play harness with a ground wire, with everything hooked up correctly. Turn the car off and it will run for maybe 3-4 seconds and then you can hear this electrical fizzle kinda like a fuse blowing or something along those lines, and it shuts the car off. I tried it in another dsm and it did the same thing, any ideas?

 

[gsx219]

well this is weird cause mine just started to do this today sometime it works some time it just shuts the car off and my is hks also...