04 Evo Turbo Manifold

[MountainDew]

Maybe I just suck at searching but I didn't find much information on this.. I have another question as well anyways.

There's a local guy selling a stock 04 Evo Manifold and 02 housing for $50. I asked if he'd just sell the manifold and he said he would for $30. This will bolt right on right? I mean it will go on the stock T-25 just fine? I need a new manifold mine cracked 3 times when I took it off and I know the Evo ones are stronger and flow quite a bit better. I figure for the price it would be worth it.

But onto my next question.. would the 02 housing directly bolt on and would it be worth the extra ~$20 or so?

You must be logged in to view this image or video.

All of this will be going on a 95' Talon. Any input/help is appreciated, and my apologies if it's been discussed over and over. Thanks

 

[forcefed4]

It may fit on your head, but i doubt if your turbo will bolt up. The O2 housing will not fit either.

 

[CanadianTSi]

The Manifold is twin scroll, it will not fit. Neither will the o2 housing.

 

[S_Ranger]

Bolt holes are diagnol, ours are aligned.

 

[LaN-]

you already have a 2g manifold, its all you need

 

[Apeximprt2nr]

Neither will fit. Don't spend the unnecessary cash for no reason.

 

[MountainDew]

you already have a 2g manifold, its all you need

It's cracked.. 3 of the bolt bolts above the ports just cracked off.. otherwise I wouldn't be making this thread.

 

[thekellbeast]

What if he gets the stock turbo, or a replacement turbo that uses the stock pattern? He should be able to use it then, right?

Anyways, my vote is to get a stock 2g manifold, or an Evo3 manifold, or one of the other cast stock mani's.

 

[oldman]

What if he gets the stock turbo, or a replacement turbo that uses the stock pattern? He should be able to use it then, right?

The EVO motor is flipped compares to a DSM, there is no way you can hang a DSM turbo on that manifold and expect to clear alternator, PS, water pump...etc.