MORE 14b swap questions

[zero97tsi]

First question, Will my stock boost control solenoid work to keep safe boost levels with the 14b?

More will come once I start the install I'm sure.

 

[Apeximprt2nr]

Yes. Do you have a MBC? If so, just run it off your 14b wastegate which is 9-10 psi.

 

[Splitpi]

Just Tee the BOV line and run it directly into the Wastegate. Wastegate is set to around 9.5 to 10 psi.

 

[DSM4me44]

Like Splitpi said, but i would run a hose from your nipple on your j pipe to your wga. Only because when i used to tee from my bov line, i got boost spike.

 

[Splitpi]

Like Splitpi said, but i would run a hose from your nipple on your j pipe to your wga. Only because when i used to tee from my bov line, i got boost spike.

Assuming his j-pipe has a nipple Mine doesn't, but I'm going to fix that soon and weld a bung onto it. But if available...always go for the nipple first...

 

[TiradoCC]

yea running a hose from the nipple on the jpipe to the actuator works best. I have a couple actually guys and i can have them powdercoated if yall are interested pm me.

 

[zero97tsi]

Ummm... Im going to go ahead and try to nutshell this for my tiny mind.

So I should completely bypass the stock boost controler?

And instead just run a hose from j pipe to actuator?

How does this keep the boost at 10 psi?

As Ive said before Im a newbie to this whole boost thing and trying to learn as much as possible here.

And whats so funny about the word nipple splitpi... jees WTF

 

[Splitpi]

So I should completely bypass the stock boost controler?

And instead just run a hose from j pipe to actuator?

How does this keep the boost at 10 psi?
QUOTE]


1) Yes
2) Yes
3) The stock Wastegate actuator on 14b's trigger at 9 - 10 psi. So you only need an MBC if you want to go over 10 psi. This is how I am running my 16G till I get a new clutch and a better fuel pump.

Nipple is only funny if you have the humor of a 15 year old... which of course I do.

 

[zero97tsi]

1) Yes
2) Yes
3) The stock Wastegate actuator on 14b's trigger at 9 - 10 psi. So you only need an MBC if you want to go over 10 psi. This is how I am running my 16G till I get a new clutch and a better fuel pump.

Nipple is only funny if you have the humor of a 15 year old... which of course I do.

amazazing. When I get my j pipe Ill got get a nipple (giggle) welded on and go that route.

btw... nipple









/immaturity

 

[Cs4g63]

Yes. Do you have a MBC? If so, just run it off your 14b wastegate which is 9-10 psi.

I also do this and I get around 8 or 9 psi. A lot simpler for the daily driver.