do you guy think i ned a fmu and a safc?

[dsun87]

i got a t3/t4 turbo

have a 190 fuel pump

do you guy think i ned a fmu and a safc????

and i have not upgrded my stock injectors

and this is a stock 96 gs n/a

thanks for the input

 

[dtowneclipse]

So you are wanting to put your turbo on your n/a? You have alot of work ahead of you. You will need to upgrade injectors, and you will def need some sort of tuning device. There is alot of work in converting a n/a to a turbo.

 

[JayRolla]

You will need a lot of work done, your looking at well over 5k to finish your car. I suggest you research research research.

 

[fourreGsixty3]

Lets see... intake pipe, injector's, exhaust manifold, exhaust, oil/coolant lines for the turbo, boost guage, WG, IC, IC piping, BOV, ECU tuning( mega squirt, or something else), and lots of other stuff. Research your butt off before jumping into this project.

 

[forcefed 95]

You will need a fmu, i would get like a 12:1. But being that your a 420a you wont be able to use an safc.

 

[Mikelb]

But being that your a 420a you wont be able to use an safc.

I beg to differ. SAFC's are pretty universal. They are not specific to DSM's, or turbos. They merely pickup the airflow sensor's readings and change them before the ECU sees them. The 420a's utilize a map sensor, IIRC...

If you're going turbo though, I might recommend something like E-manage, Megasquirt, etc...

They're better than an AFC, as they allow more control over your fuel without pulling timing like the AFC...