How does this set-up look (open to suggestions)

[Street_Killer]

Im ready to get a bigger turbo on. Took a year but the time has come.

Im open to any and all suggestions. I will take the cheaper route, but I will not take any short cuts. Your welcome to mention anything else I will need. I have a fmic on its way, so dont mention that. Also Is it a must for a 3 inch intake?



http://www.slowboyracing.com/estore/product.php?productid=9&quantity=1
http://www.slowboyracing.com/estore/product.php?productid=99&quantity=1
http://www.slowboyracing.com/estore/product.php?productid=100&quantity=1
http://www.slowboyracing.com/estore/product.php?productid=1151&quantity=1
http://www.slowboyracing.com/estore/product.php?productid=1155&quantity=1
http://www.slowboyracing.com/estore/product.php?productid=1657&quantity=1
http://www.slowboyracing.com/estore/product.php?productid=1891&quantity=1
http://www.slowboyracing.com/estore/product.php?productid=3743&quantity=3
http://www.slowboyracing.com/estore/product.php?productid=3746&quantity=1


There is all that, plus Im gettiing the recirced o2 and tial 38mm external wastegate from punishment racing.

 

[DGajre777]

Turbocharges.com GT Manifold is about $160 and almost 1/2 the price of the SBR manifold
which many members have had issues with cracking.

Personally, if you want a 50 trim I'd go with an FP Green over that turbo. PTE has 50 trim ball bearing turbos if you are concerned about spool up, www.dejonpowerhouse.com sells these.

Your profile seems to have all other mods you need, except FMIC which you already mentioned you were getting.

Finally check www.vendors-reviewed.com on SBR.