Stutterbox on awd not boostin...?

[ziggys95tsi]

when i hold in the clutch and put my car in 1st, and slam the gas like i was going to launch, i was builing up like 7- 8 lbs of boost, but no longer am i building that boost anymore. i bought my car with dsmlink installed on it and the studderbox so i dont really know how to change the features or anything. any input would be thankfull.... thanx

 

[The_EE]

Do you have a laptop with the software installed? If you are no longer building boost, I would first check for a boost leak. For me to build a decent amount of boost I had to use stutter box and anti lag at same time. I could get up to 18 psi off the line ( way too much by the way )

 

[Dream On]

I only build about 5-7 psi with it set at 4500 rpm on a ported 14b.

 

[Bmxr152]

Ya i only build about 5-6 psi with it set at 5200 rpm. I was wondering the same thing, shouldnt it be a little higher?

 

[ziggys95tsi]

it sounds like mine is buildig up but there is no boost reading on my gauge and i know for sure the gauge works. jsut wondering if it may be a boost leak somwhere and what seetting it is under on the dsm link.