Which ignition wires to use with "Cyclone" engine

[tharaka]

Which leads should I use with a Cyclone engine?
I am under the impression that the coil packs on the Cyclone are in a different location to the standard intake....

I want to get some 10mm leads, but I don't know which ones will reach...

Thanks

 

[gsxeclipse97]

Almost any set of wires that you get will reach I have a cyclone and the coil pack is in a different place but wires are plenty long.

 

[LordZed]

A lot of people will use just stock length wires and move there coil pack accordingly. That's what I did. I just mounted the coil pack to a fabbed bracket that I attached to the driver side shock tower.

 

[tharaka]

Almost any set of wires that you get will reach I have a cyclone and the coil pack is in a different place but wires are plenty long.

Really?
The set I have on right now are a very tight fit, some of the cables have plenty of length left, but 2 of them are very taught because they are just reaching from the coil pack to the spark plug

i just dont want to spend $100+ on wires, and then not have them fit...

 

[Defiant]

Sorry, mate. We talk American over here. Now, buy me a schooner.

 

[LordZed]

Really?
The set I have on right now are a very tight fit, some of the cables have plenty of length left, but 2 of them are very taught because they are just reaching from the coil pack to the spark plug

i just dont want to spend $100+ on wires, and then not have them fit...

Move the coil pack, build your own wires, or try to switch the wires that are taught with the wires that have slack.