push lock line leaking

[DiamondStarAwd]

I just installed my fpr kit with aeromotive fpr and push lock line kit. It seems to want to leak where the line goes on the fitting.

I pushed the line on as far as I can to where its flush with the little redish circle at the bottom of the fitting, am I supposed to crimp that fitting or how does that work.

 

[daren_p]

No, there should be no crimping needed that is if you are using the correct push lock hose? If you are using a std rubber hose on a push lock fitting then you will need a clamp to seal it as the hose wasn't designed to seal with this type of fitting by itself. If it a push lock hose & fitting you should just be able to push the hose on till it bottoms out & thats it.

 

[DiamondStarAwd]

Well I did, and well it leaks. I bought the kit from slowboy.


Should I try and put a clamp on the push lock fitting as well. I don't know if im going to be able to get a clamp over it tho hhe.