Logger Blows Radio Fuse when plugged in

[jon21388]

Whenever i try to plug my OBD2 cord with my logger attached to it, it instantly blows my radio fuse. I have no idea whats going on. Could someone please give me some ideas on what to look for or possible solutions? Thanks.

-Jon

 

[Gamble97]

Plug something else in and if it blows then you have a problem with your cig lighter socket. If the other device works then you have a short with your cable for your logger.

 

[jon21388]

cable is brand new so I hope it aint that. Can i just unhook my I have my halos wired to my cig. lighter could that be the problem with the fuse blowing?

 

[jon21388]

sorry for the double post but what plug something into the cig. lighter socket or the diagnostic port?

 

[Gamble97]

Yes it could be because something else is wired in there, putting too much current through. Try to turn off your halos or at least unplug one of the wires and see if it still blows.

 

[jon21388]

i'm going to try unplugging my radio to, see if that works.