The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

I don't know where else to post this

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DeadlyEclipse95

15+ Year Contributor
74
2
Jul 30, 2004
Huron, Ohio
:dsm: :talon: A good friend of mine just picked up a FWD 1991 Talon Tsi...it has 83,000 miles on it and we just changed the timing belt.....it is 100% stock....We have a high school drag racing event coming up in may and we were wondering what is the quickest way to get it to a high twelve or low 13....I have my own idea of how to do it but i just want everyone elses opinion....its appreciated:dsm: :talon:

Thanks fellow DSMer's
 
first thing is to get a aftermarket boost gauge and Boost controller the you have to get an exhaust done full 3 in ,then injectors 550's would work with SAFC 2, at least small 16g,well you can port your stock 14b and it should be ok, after that youll need a wb o2 and logger to tune the car right,and the main thing for the track is a Good Slicks
 
search project goodwill. they got a 1g fwd on stock turbo into the 10s last i checked.

power mods, weight reduction, slicks, slam the front end and make the back suspension real stiff to decrease weight transfer.

a lot of it depends on whether this is going to be strictly a drag car for this project or if its going to pull street duty afterwards
 
Strip her... As long as no one is along for the ride down the track. Passanger Seat, Rear Seat, carpet, sound system, spare, jack, the list goes on and on... Remember that its the power-weight ratio that maters. 550's, S-AFC, Walbro 255, and areomotive fpr. I have an areomotive fpr and love it, thats not something you want to go cheap on. I suggest porting your turbo and exhaust mani yourself. Making your own 3in exhaust would be nice if you have the tools and the time. If not there is some good stuff on ebay... hope this helps...:thumb:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top