1g bov?

[DSM-Talon-John]

Will it fit onto my upper ic piping that had a greddy rs on it? Also Im boosting to 14psi and it is bleeding off to 10, could that be a boost leak or my mbc?

 

[BISHILVR]

It wont fit directly without some modding (mine have'nt). Your boost problem sounds like you have the mbc connected wrong-o or turned down to 10 psi

 

[DSM-Talon-John]

then why does it boost all the way up to 14 psi

 

[BISHILVR]

It sounds like you are just hitting boost spike for a second at 14psi, and then you are running on stock wastegate pressure of 10 lbs.

 

[-TunedDSM-]

Or he could be losing boost up top with the T-25. Does this only happen at high rpms? Just a thought.

 

[BISHILVR]

Or he could be losing boost up top with the T-25. Does this only happen at high rpms? Just a thought.

I was able to run 20-25 lbs on my t-25 though.

 

[EclipseTrbo420A]

I was able to run 20-25 lbs on my t-25 though.

Hmm...



Anyway... the T-25 will boost a good 14 up untill about 5500 rpms and then it starts to back off. Its just to small.

 

[DSM-Talon-John]

it bleeds off before that, im not sure where but it does.

 

[Merkles]

I was able to run 20-25 lbs on my t-25 though.

well 20-25lbs on a t25 ummmm are u sure? I just have a hard time believing that. At what point did this turbo blow again?


Sorry its just hard for me to imagine why someone would even attempt to do that

 

[BISHILVR]

Yep, it would hold 20 lbs. No good reason for doing it, just did it. I still have it and its fine.

 

[delta448]

Yep, it would hold 20 lbs. No good reason for doing it, just did it. I still have it and its fine.

I'm assuming a stock exhaust with cat, stock airbox, not porting anything, stock cams and not revving past 6k. -Y or N? -It's just incredible, I've never heard of a T25 pushing that amount... are you sure it's not somehow modded with a T28 wheel or something?

 

[BISHILVR]

Yeah, it was all stock back then. I have'nt pulled the turbo apart but I would have to say its just a
t-25 though