The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

clutch issue

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

carsaval

15+ Year Contributor
115
0
Oct 18, 2006
Yukon, Oklahoma
In the cold weather my clutch doesnt want to disengage it will stick to the floor and at stop lights it sometimes slowly starts engaging. after drviving for about 10min or warm up of about 7 the issuse is almost non existent I have thorughly bled the line, I no longer have the slave resivior but this happened before that too. I am currently using dot3 fluid maybe that is my problem ?.
 
Check The Master for leaking signs, you may have a wet carpet. Also check the slave, pull the boot off and check if fluid comes out. Good luck. :thumb:
 
I just replaced the slave, I have an extended clutch rod, an act2600, and a ss line from the master to the slave, supposedly my master cylynder is new. I use dot3 fluid.
 
Just make sure you are using GL4 or higher tranny fluid. Seriously, my clutch engaged poorly in the cold mornings, but better in the warmer day. It turned out to be my transmission and had to replace it.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top