safc setting yes ive seacrhed

[lmarinukjr]

Ok guys, i just bought a 92 eclipse and i found gold tucked next to the ecu. Its a safc almost completly installed. i finished installing it now i realized i dont know how to set it. My mods are few my car is tight no boost or vaccum leaks. k&n filter 2 1/2 cat back. Initial setting is done now how do i finish setting it.

 

[ericbev]

http://www.dsmtuners.com/forums/showthread.php?t=58403

 

[Auto RS T]

If you are going to start adjusting with an AFC, I would suggest a logger be used to tune with.

How an AFC works:
http://www.dsmtuners.com/forums/showthread.php?t=105569

Tuning Guide:
http://www.dsmtuners.com/forums/showthread.php?t=58403

The adjustment settings are under the high and low throttle screens.

Set your ne points and throttle points first if you haven't.

 

[lmarinukjr]

Ok ive set my THpoints at 30% and 80%. I had a problem setting my ne pionts I got it to 1k 2k 3k 4.4k 5k 6k 6.4k 6.6k 6.8k 7k. Is that ok?

 

[lmarinukjr]

i also had a slight problem finding the section to set my baseline for my injectors.

 

[GVR4592]

Read the guides again, the information is in there.

 

[lmarinukjr]

Ive read them I dont have the manual this is the first time ive seen an safc in a dsm.

 

[GVR4592]

I could tell you exactly what you want to know, but if you don't understand what you're doing you could damage your engine. I suggest you keep reading the guides, as well as these:

http://roadraceengineering.com/newafc.htm

http://roadraceengineering.com/newafcsetting.htm

If you read those a couple times and you're still having trouble, PM me and I'll walk you through it step by step. I also suggest you get a datalogger, because without some sort of feedback you aren't going to know what to adjust.