14b on 2g q's

[Talon-96]

Ok Im sorry for asking these questions as I know they have been answered before but for some reason when i search it wont work for what im searching for and the info they give me is to broad for me to find anything.

So with that said here are some of my questions.

1.)Can someone give me a link on the install of a walbro 190 for a 96tsi

2.)I bought a rebuilt turbo(10k on it) with the 02 housing and install kit for 290, good deal?

3.)What out of the install kit do you actually need? I heard you only need a few of those things.

4.)What psi can I run safely with the mods in my profile, and now including my walbro 190? I was thinking around 17?

5.)How many hours would it take a veteran to install a 14b on my car? I know a very experienced guy who works for cheap, how many hours shoud it take?

sorry for the newb questions, I think the whole searching problems is due to the temp server but not sure.

 

[wret]

I don't suppose you thought to look in the tech articals section...
http://www.dsmtuners.com/forums/showthread.php?t=92558
http://www.dsmtuners.com/forums/showthread.php?t=197042

 

[fwdturbobov1996]

1) vfaq or ^
2) ehh depeds. If you feel happy with it.
3) I used sbr's 2g install kit, I just switched the water lines and bent them a little( they will bend more than you think ) and it fit just fine.
4) Dont push your luck, stay stafe. 14-15. You will still notice a difference
5) Took me about 4 hours, had some fitment issues with the licp and water lines. If he works fast and all goes smoothly. 2-3 hours.

 

[MoparTurbo]

the water lines are like brass or copper or something, but either way bending the lines and getting a oil feed line will get you realy close to having it running

 

[idt512]

3. Jpipe and oil feed line is the bare minumum you will need
4. i pushed 17psi with my 14b, walbro 190 and stock injectors, had plenty of fuel according to my logger