Auto ''X'' set up

[Turbizmo]

I want to make my dsm for autocross...Im currently installing my FMIC with short route piping and i was wondering how do i eliminate the A/C ...

What other mods should i do?

like, what turbo is quick spooling and makes good Hp
or
Tein suspension


I know im berely starting my project but i need some advice. I really want to have a car that is a good daily driver but also good on the track.

 

[JLangevin]

Well, from my auto X experience, I can tell you that you may want to go with a Supra or other aftermarket sidemount... since Autocross is mostly a much slower speed, quick turning course, you will need the best cooling possible. We all love the look of a front mount, but I have recenetly decided to go with a large sidemount do to being a 95 front facia.

Also, The suspension on an autocross car needs to be adjustable, so the MINIMAL suspension I would reccomend would be a KYB AGX at all four corners with a name brand spring like Eibach, Hotchkis, Koni, etc... But the ideal setup would by far be a coil over. Next, tie bars, strut mounts, sway bars, bushings, etc... You will be constantly loading and unloading the suspension which will rip right through the stock rubber bushings in no time. Keep all this in mind, if you plan to go serious.

After the suspension is complete, then you look into larger Power Steering coolers, and rebuilding the power steering rack before you even start.

As for a quick spooling turbo, as mentioned, autocross averages much slower speeds than road courses, so I would go with the all around healthy TDO5H 16g