Issues after FMIC

[Chris95GST]

The first question, was I was wondering what a good site/place would be to get a new recircutlaion tube for a Greddy Type S BOV. I also wanted to know a good site to get a smaller coolant overflow bottle. I did a search and found one guy's kit he made as a solution but I'm still waiting for a response. Thanks for any help

 

[TurboWing12]

Did you try using the stock, one for my greddy i didnt recirculate it but i have friends who used the stock one do they make an aftermarket one ?

 

[TSIMonsteR]

I'd also be interested in the smaller coolant bottle. Anybody know where to get a nice one?

 

[Chris95GST]

My stock re circ tube is beyond done I was hoping to find a semi cheaper or better replacement since they charge ~20 for the OEM one and with my setup I don't need nearly as much tubbing.

 

[EvolvingGST]

i want you guys to type in search gatorade overflow bottle. There are also several other if you guys want to find it... Most people will say Jegs or a Toyota AE101 overflow bottle that comes stock with their cars.

 

[nightspeed87]

yea go theres a guy on www.cardomain.com under the eclipse section i believe ,with a 1990 1g called darkspeed i think, he has a orange gatorade coolant bottle... Really if you rig it up right you can use just about any type of bottle you want as long as its not too small.... Or go thru the junkyards and see which ones fit nicely...

 

[JayRolla]

You can just use a tube from a part store and cut it to fit for the BOV. And for the over flow go to this site. http://jmfabrications.com/

 

[Chris95GST]

What kind of tubbing would work and does any one know the diameter?

 

[RedTurboEclipse]

I dont know the exact diameter, I would bring the BOV to the hardware/auto store and see what works. I don't know what kind of ic pipes you have, but if the BOV is around the same location as stock, just look for someone selling the oem recirc tube. I've been using my recirc tube through 3 different ic pipe setups. From 2 that were around stock location, to now with short route and the bov is a little bit lower and closer to the block, and the stock recirc tube still works.

 

[Chris95GST]

I'm ussing the SS auto crom FMIC, but the BOV is alot closer to the recirc tube now and I need a really short one plus my OEM one has cracks in it. Would radiator tubbing work?

 

[RedTurboEclipse]

ah, well ours is similar, 95s and using the xs kit. Here is a pic of my engine bay, its about a few months old, i'm no longer using the greddy type s (authentic), using the hks knockoff, has been performing better for me, the type s was leaking at high boost. though I am still using the same recirc. tube.

You must be logged in to view this image or video.