Lost harness for Greddy EGT

[johhnyx]

Hi, I have an E52 EGT gauge from greddy that I got from ebay.
It unfortunately did not come with the harnesses.

I've search both their site and all the postings I could find, but everyone just
give directions assuming the harness colors (red, orange, white,etc)

I need to know looking from the back of the gauge, which pins go to which color wires on the factory harness. I'm assuming the 3pin for the thermocouple is just using 1 and three on that connector.

But I don't know the red, org. etc. order from left to right for the 4 pin.

If anyone has a gauge/harness that they could verify this on for me, it would be most appreciated.

Thanks!~
J

 

[gstcruzr]

I've got the same problem right now. I need to know the order of the colors looking at the back of the gauge.

Mike

 

[andymoraitis]

I know you guys are new, but searching shouldn't only be confined to this site. This link came up after typing "Greddy EGT install instructions" in a Google search:

http://www.roadraceengineering.com/instructions/greddygaugeinstructions.htm

Try it next time,

Andy