What do you think of this log?

[98gst14b]

Mods are in profile, I wouldn't rely on the o2 voltage at first I couldnt get anything at all maybe .02-.04 at times but #2 sensor gave me some readings, I cant understad whats going on here and why timing gets pulled so late and when the afr is actually where it should be (.92)?? Opinions? Thanks

RPM Tmg TPS O2 #2
855.0 12.0 0.0 0.02
1414.0 7.0 9.82 0.92
2148.0 24.0 33.79 0.9
2383.0 25.0 95.09 0.14
2758.0 26.0 95.09 0.08
3391.0 25.0 95.09 0.66
4180.0 23.0 95.09 0.1
5559.0 11.0 95.09 0.98
5957.0 14.0 79.37 0.82
6645.0 18.0 77.8 0.24

 

[JayRolla]

How much boost are you running. Looks like a lot of knock in above 5000.

 

[JayRolla]

Also you not showing much data. the data looks like it jumps every 600rpm. You should beable to have 200rpm increments

 

[diablos991]

Was this a third gear pull? Why aren't you going WOT?

 

[98gst14b]

it wont log like that the more data I select the less time it logs and im running 18-20 psi (in profile)

 

[98gst14b]

No its an automatic so either I do it in 1st or figure out a way to put it in limp mode, and I did WOT it i guess the tps doesnt see it as 100%...

 

[hottboost]

The only thing you need to log is timing, rpms, front o2. try to do a log from like 35mph to 90mph. It looks like your knocking alot above 5000Rpms

 

[98gst14b]

is it possible that it is too rich? The timing seems to get worse from -34% to like -27%. I cant get a rading from the front o2 only .02 - .04 volts.