You are currently browsing the site as a "Guest", which means your are either not registered or not logged in. This also means you have limited access to our site and cannot participate - you also are browsing the site with more advertisements than logged-in members.
Newbie Forum: Beginner/newbie/general DSM modification questions. First mods, how to run 10's when you haven't run 12's yet, any tech question that doesn't fit in another tech forum. Probationary Members must limit their tech posts to this forum and sub-forums.
My speedometer doesnt read anything. My tach works but not the speedo. The sensor is plugged into the speed sensor so i dont know. I did pull the sensor out so it wouldnt get busted when i took the tranny off and i put it back in and it doeant work. any ideas?
I would start with checking power at the sensor. Then replace it with a known working sensor. If that doesnt work then it could be the gauge. If it worked before you took the car apart and now it doesnt work then my guess is you messed something up. I would start with the wiring
Eclipse GS Turbo - MSnS powered holset on 23psi
DSMtuners is not affiliated with Diamond Star Motors. The Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, Mitsubishi Galant VR-4, and associated logos are trademarks of Diamond Star Motors, Mitsubishi Motors, and Chrysler Corporation.