The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

tire pressure for track?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RedTSiAWD

20+ Year Contributor
119
0
Jun 9, 2002
Farmingdale (Long Island), New York
hey do you guys lower your tire pressure for the track? just a simple quesiton, and hopefully a simple answer. take it easy.

JD
 
It's probably better to raise your tire pressure at the track. What you want to do is get some chalk and make a few marks (3 or 4 should do) that start about an inch down on the sidewall and extend them all the way across the contact patch of the tire. Then take a lap or two around the track. The chalk on the contact patch should be completely gone and the chalk on the sidewall should still be there, that means you are using all of you tires, but they are not bending. If the chalk is only missing from the middle of the tire, then your pressure is too high, when the chalk is missing from the sidewall the pressure is too low. The actual amount of air in your tires depends on your tires, their sidewall ridgity, temp, track type, track conditions etc., You probably will want the front tires running about 5-10lbs more than the back, a little less of a difference if you are running all-wheel drive.
 
thanks fellas....most appreciations to you both.

later

JD
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top