Alignment kit needed for rear on 1g AWD? Details inside. Please help!

[DSMRevolution]

I put KYB GR-2 shocks and struts on my 1g AWD along with Eibach Sportline shocks. It handles AWESOME and it isn't bumpy at all really. I am really happy with this setup, but I have a TON of rear negative camber. The front looks pretty good. I can't find a rear alignment kit for this car. Tirerack only has a front kit. I am getting an alignment in a week or so after the springs settle. Should I mess with an alignment kit or not? Will getting an alignment done be enough?

Thanks and I appoligize if this was answered before. I just got off work and I need to get up eairly again tomorrow so I don't have time to search really at the moment.

Thanks for the help and possibly putting up with this question again.

 

[talontl]

If you could let me know when and where you find the rear kit, I have the same problem with my car.

Thanks, Travis

 

[DSMRevolution]

Originally posted by talontl
If you could let me know when and where you find the rear kit, I have the same problem with my car.

Thanks, Travis

i will. I still need to know. later

 

[91_talon_at]

rear camber kits for 1g dsm

ingall's adjustable control arm: $150+
whiteline ecentric bushing KCA365: $50
http://www.whiteline.com.au/store/

also check the vfaq site or this
http://co.dsm.org/users/jake/DSM/projects/rear_suspension/index3.shtml

 

[GRNDSM]

I did “RRE mod” to the lower control arms. I slotted them ~1/4” toward the center of the car and welded on some washer to fix the bolt in place. At first, I thought welding was not necessary and just tightened it up… Bad idea… YOU NEED TO WELD IT!

Leon
RR

 

[91_talon_at]

there's also this mod for the rear control arms
http://www.taboospeedshop.com/brackets.htm