The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Wheel fitment question..

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Im not sure of the offset, but since your going to a 9 inch wheel, I would assume a lower offset would be needed. Not crazy lower, but lower.

I always use this site to give me some raw data on what would be changing. Always helps out.
Wheel Offset Calculator

BTW, I almost picked up that same set. Love that style!
 
Im not sure of the offset, but since your going to a 9 inch wheel, I would assume a lower offset would be needed. Not crazy lower, but lower.

I always use this site to give me some raw data on what would be changing. Always helps out.
Wheel Offset Calculator

BTW, I almost picked up that same set. Love that style!

to be honest, i am clueless with wheel sizes...

I have no idea how to work that calculator..

Any ideas anyone?
 
I highly doubt that offset would work.

For reference, I put in my current wheels (17x8 +38) and the wheels you're looking at. This is the results from the calculator:

The clearance from stut housing to the inside of the wheel will be 17mm LESS
The outside edge of the wheel will EXTEND an extra 9mm

What that's saying is the distance between the wheel and the knuckle will be 17mm less than it is with the current set (i.e. the new wheel will be 17mm closer to the knuckle). It's also saying the new wheel will stick out from the fender 9mm further than the current wheel.

For reference, here's what I actually measured clearance wise to the knuckle (both 2ga and 2gb knuckles) on the 17x8 +38 wheels I mentioned above, which backs my first sentence of this post.
http://www.dsmtuners.com/forums/152189873-post18.html


Also keep in mind your tire choice will have an affect as well as some section widths vary in the same size tire, ride height, and camber all come into play to some extent.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 4G63 NEW Stop Tech Drilled And Slotted Rotors
    New Stop Tech Drilled & Slotted Rotors $70 + shipping and paypal fees* FITS * Eclipse GST...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top