The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Koni or Tokico adjustables

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

97gssleeper

20+ Year Contributor
50
1
Apr 2, 2003
Richmond, Virginia
I would like to know what you guys would recommend between the 2. I'm looking to replace my AGX's and I have Ground Control coilovers. I was leaning towards the tokico's but saw a post where more people seemed to be talking about the Koni's.
 
Before I got my JIC coilovers I used koni's and LOVED them. I also used them on my 240sx before I got coilovers for it and have had not a single problem with them. If funds dont allow koni yellows then wait till they do because I think they are well worth the money. But if you just use your car for daily driving and nothing else then the others will be just fine. Hope that helps some!
 
Note that Koni's have more damping than Tokicos, so if you are running stiff springs you definately want the yellows.
 
Currently I'm using the street setup from ground control. I can't remember the spring rates though. The car is mainly a daily driver with alittle twisty driving. So, from everyones comments, I guess I should get the Koni yellows instead of the Tokico illuminas if my wallet will allow it. Thanks for the help so far.
 
Originally posted by 97gssleeper
Currently I'm using the street setup from ground control. I can't remember the spring rates though. The car is mainly a daily driver with alittle twisty driving. So, from everyones comments, I guess I should get the Koni yellows instead of the Tokico illuminas if my wallet will allow it. Thanks for the help so far.

Well if your wallet doesnt allow it right now then wait! I assure you that if u choose to wait it will be well worth it to get the yellows!!!
 
where is a good place to pick up the koni's and about how much are they running (avg)?...{97gssleeper those GC coilovers...you like them?}...i have to get the whole setup...need new shocks and springs i can adjust...i have just a set of sprint lowering springs on oem shocks and the ride is ruff not to mention way to low...ideas, suggestions?:confused:
 
My girl has the koni yellows(GSX) and I have the Tokico Illuminas(TSi FWD). The konis are nice but they only adjust rebound I think, and the konis dont have any way of letting you know where your adjustment is at.The tokicos have five levels and adjust rebound and compression.For the street the tokicos are the way to go, on the softest setting they feel almost softer than stock.But for performance I would go for the konis.:cool:
 
I like the GC's. A friend of mine got those sprint springs and they sucked big time. I guess I'll try to find the Koni's. Anyone know of a place to get them cheap?
 
Originally posted by 97gssleeper
I like the GC's. A friend of mine got those sprint springs and they sucked big time. I guess I'll try to find the Koni's. Anyone know of a place to get them cheap?

I got mine from horsepowerfreaks.com...they didnt seem priced to bad at all but I'm sure someone could find them cheaper somewhere else.
 
Originally posted by ShyBoyRico
The konis are nice but they only adjust rebound I think, and the konis dont have any way of letting you know where your adjustment is at.

You are correct that Konis only adjust rebound ... at least until you get to the top 1/2 turn of stiffness, when it starts to have strong effects on compression, as well. As to how to know where they are adjusted, this is quite simple. Always first crank the shock up to full stiff (this is a general rule for adjustable shocks, not just Konis). Then back the adjuster off, keeping track of how far you have turned the knob. To be clear: always turn it at least one 1/2 turn down from full stiff to avoid the nasty rise in compression caused by the covering up of some bleed ports in the head.

In summary: If you can count to two in steps of one quarter (since I don't know of anyone who is more precise about their Koni settings that quarter-turns), then you can keep track of how your Konis are set.

- Jtoby
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top