The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

How to rewire 1g foglights

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tarheels23

10+ Year Contributor
102
0
May 15, 2011
struthers, Ohio
Last winter my foglights had stopped working and when I would try to turn them on I would smell smoke and would see some come out from behind the plastic in my wheel wells so I took the fuse out and stopped using them. Before this winter I had looked to see why they didn't work and the plastic around the wires was fried and the wires were almost eroded apart. I used some extra wire that i had laying around and and replaced the wires that were destroyed.

When I put a new fuse in and turned them on I used my multimeter to check if there was any power going to the lights and there were none. Where can/should I start to try and get them working again?
 
Sounds like there is a short somewhere in the system. Time to start tracing wires back and find the problem whether it is the switch or some wiring.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top