Harness Re-construction, removing unneccessary wires

[tkstoygsx]

I am in the process of cleaning up my engine harness for a wire tuck and have run across a few wires that I would like to remove all together without any adverse reaction . I am unsure if this will be ok or not so this leads to my thread asking for fellow members thoughts. I was thinking it would be ok to leave the below mentioned out since I no longer use any of the sensors themselves. Could some of you please leave your feedback so that I can get this part of my project finished up!

(numbers correspond with PIN Location per vfaq.com) and these are being removed @ the ECU.

3 - Turbo Gauge
5 - Power Steering Oil pressure switch
7 - Air Conditioner Switch
11 - ABS control unit
15 - EGR Temperature Sensor
53 - EGR Control Solenoid Valve
57 - Fuel pressure Control Valve
62 - Purge Control Solenoid Valve
65 - Air Conditiong Relay
105 - WasteGate Solenoid Valve

Thanks,
Travis

 

[Rsawd95dsm]

I am unsure on the power steering wire as I left mine but all the rest you can get rid of with no problems.

 

[11secDSM]

Other than a few of those being possible inputs for the ECU via ECMlink, they serve no purpose if those items are removed.

 

[tkstoygsx]

Thanks for the input fella's. Ill get this wire harness completed over the weekend and run some tests.

 

[Rsawd95dsm]

We will be waiting

 

[SloRice]

Been there, done that! ::

I had no ill effects removing those. But I'm also running AEM EMS, so not sure if that had anything to do with it.

You must be logged in to view this image or video.