The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

No Freeplay

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

OwN1GST

20+ Year Contributor
39
0
Feb 12, 2003
When I start my car it is almost impossible to put into 1st gear. And it Always grinds if I go straight to reverse w/ out going into 1st gear. I have a act2600 I adjusted the pedal and still no difference. Also my cars clutch is not as stiff as it used to be? PLEASE HELP!!!!!!!!!!!!!!!!!! :thumb:
 
bleed your clutch lines for sure... and adjust the peedle hieght from under the dash.. its a pain in the ass to adjust but its gotta be done.
 
The very same thing happened to me I had a 2600 put in also and the pedel went soft after a few days I took it back and they told me to replace the master and slave so I did and same pedel feel so i messed with the rod on the master and it was stiff for 3 days and then soft again and the play is f@#$ now well I took it to a pro trans guy i know and it is the clutch fork the thing the slave pushs on its bent and what p!@#@ me off is the Famous shop around here diddnt tell me the fork had to be replaced to handle the pressure so i going to have to spend the big money again just to replace that $85 piece If you live in Illinois dont take it to GRD they dont care about you just your cash.:mad: :mad:
 
how can i check to see if the fork is bent cause im having very similar problems
 
You have to take the trans down or if you can push it the direction its not supposed to go then its 85% chance its the fork (what clutch do you have)
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

  • Wanted 4G63 WTB Evo 560cc injectors or 450cc
    Im looking to pick up a set of evo 560cc injectors or possibly a set of 450cc injectors if the...
    • eclipsemf
    • Updated:
    • Expires
  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
Back
Top