The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

[RESOLVED] no reverse after car is warm (5 speed)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

canucatchdis

20+ Year Contributor
333
0
Jan 2, 2003
Moline, Illinois
Ok, I have searched because I could swear I read an article about this before but maybe not.

My reverse will work just fine when the car is cold (just started).
I cannot go into reverse after I have driven around a bit. The shifter will move into the spot where reverse should be but it acts as if nothing is there. I have looked under the hood to see if my intercooler piping was resting on the shift cables but that is not the case.

Any suggestions?
 
Well lets start with the easy stuff, have you checked the transmission fluid?
 
See if you can drain a bit of tranny fluid out and let us know what material appears to be most prevalent...aluminum, brass, steel, etc.
Synthethic fluid? What kind?
 
I have synthetic fluid in there currently. The fluid is Red Lines MTL. If it has any relation, I have Mobile 1 synthetic 75w 90 in the transfer case.

Could this possibly be a result of the bushings on the end of the shifter cables being warn out?
 
It could be the teeth are rounded off for rev gear causing engagement issues. Could be a broken shift cable. Could be bad bushings if it is not pushing the lever all the way forward to engage fully into rev. When cold the case is putting slightly tighter preloads on the input shaft, so it could be going into rev easier as the synchro for rev doesn't really have to work as hard. Once warmed up, the synchro needs more pressure in order to work and that needed added pressure might be just enough where the cable is unable to move the shift shaft far enough. I would definitely check cables, brackets, and bushings first...

Jack
 
Not sure why I thought the problem was only when the car was warm but I got it fixed.
The problem was the clip that holds the shift cable in place was missing. I found one and replaced it. I also did the ballbearing mod which is awsome.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
Back
Top