OBX short shifter

[MindBlowin03]

Anyone 2G owners have experience with the OBX short shifter. It seems to be a bit cheaper, and I was wondering if its any good.

 

[L2RTSiAWD]

NOOO!!! I have one and it is the biggest POS in the world. Let me just say this about there "quality" after I had it for 2 months one of the welds broke on the shifter. It is also sloppier than a 50cent crackwhore.
Get the B&M.

Later,

 

[gstspyder1998]

Originally posted by MuttedTSiAWD
NOOO!!! I have one and it is the biggest POS in the world. Let me just say this about there "quality" after I had it for 2 months one of the welds broke on the shifter. It is also sloppier than a 50cent crackwhore.
Get the B&M.

Later,

Thanks for the advice, I almost bought one on Ebay.

 

[purplefever]

i agree, B&M only

 

[Gambit]

I was thining about getting an OBX shifter. I know that they are not very good, but my stock shifter's pivot point is broke and I really can't afford $200 for the B&M right now. If it is at least as good as the stock, I may consider it. I know the dealer will rip me off if I just want a replacement.
Let me know your opinions

 

[Defiant]

Originally posted by Gambit
my stock shifter's pivot point is broke and I really can't afford $200 for the B&M right now.

$155 at Road Race Engineering.

 

[jaders]

I bought one off ebay and the only problem I had was that it was very loose and sloppy. I just through in some extra washers in to tighten it up and it works fine. It decreased the throw dramaticly. Not a good shifter if you want the shifter short. I had to cut mine down.

 

[Gambit]

nevermind, I got a B&M. Works nicely with 50% reduction