EXEDY Cerametallic Clutch

[my97mitsGSX]

anyone have experience with this clutch, i have awd and looking to run in the 11's down the track

EXEDY Cerametallic Clutch

i'm not looking to go alot, i'm also going go get a lsd for the center diff

 

[KRAZYKOREAN]

Originally posted by my97mitsGSX
anyone have experience with this clutch, i have awd and looking to run in the 11's down the track

EXEDY Cerametallic Clutch

i'm not looking to go alot, i'm also going go get a lsd for the center diff

looking to run 11's well good luck with that..also yes that clutch is usable but for me just use whats been proven over and over the act 2600

 

[my97mitsGSX]

well if the excedy can handle 11's, and its not such a hard pedal feel, then why go with the act 2600 and be annoyed sitting in traffic

 

[KRAZYKOREAN]

Originally posted by my97mitsGSX
well if the excedy can handle 11's, and its not such a hard pedal feel, then why go with the act 2600 and be annoyed sitting in traffic

well if your so worried about the pedal feel then whatever....you weak ass left foot should just get the exedy clutch then..

 

[my97mitsGSX]

hmm.. i guess i'll go with what's proven over and over... but I always like to be different...

 

[blu_gxl]

I have anexedy cerametalic atage 2 3 puck and the pedal feel is about the same as a 2600 i'm sure I had a 2100 before this and it's heavier than that was

ps I love my stage 2 no slippage and I can get it hot with out worrying if it'll burn

 

[my97mitsGSX]

what's the most a 2600 can handle on the track with awd, as far as 1/4 mile times.. because i'm maybe considering going 10.9's with the car

i mean i'm dumping over 10k into my car already..

 

[killab443]

were in nj u halin from? im in howell

 

[my97mitsGSX]

i'm in the edison area

i almost have my entire car stripped.. i already pulled out the passenger side axle, i still need to pull out the other 3. i'm going to replace them..

the interior is stripped. suspension removed, no brakes.. and i'm pulling out the motor once the tranny is out.

I haven't ordered any parts for the car yet, but I will once everything is removed...

I'm looking to click off 10.9's yet be reliable and streetable as much as possible.. i understand things will break..

my97mitsgsx - AIM if you want to chat

 

[KRAZYKOREAN]

hmm planning on running 10.9's out more difficult then running 10.9's...but people dream...regardless of you spend 10k or more doesnt mean you will hit 10 or even 11's