Is This Possible Bone Stock Talon LOOK!

[Seanthaplaya]

i have a 1998 eagle Talon No Turbo BONE stock with NO intake no exhaust no nothing all stock parts i took it to the track oct 3rd and i ran consistant low 16's i was told my car would only run a 17 or high 16's but i ran a 16.1@86mph and i also ran a [email protected] i even have the timeslips to prove it ill post them on the boards once i have someone scan them for me i want to know your input on this

 

[nineD5_GS-T]

Lets see the slips.

 

[Seanthaplaya]

i will put them on as soon as i go by work and scan them probable being around tonight or so

 

[Seanthaplaya]

here is my 16.3 attached slip

 

[Gleason]

uuuuhhhhhhh, i dont see any slip there....repost

 

[Seanthaplaya]

it will not let me put the file on here because it is too big or something if you want the slip give me your email

 

[wastefuldreamer]

Congrats

 

[Bohrn]

nice job

 

[noz]

ya........some cars are just built faster....stock to stock from the factory.... you're probably just one of the luckier ones with a faster stock car.......

 

[Tallen]

Maybe he just has skill...good job!

 

[Eclipse96Ryder]

hey......


good job on the 16.1 thats what my car ran stock too....hmmm, crazy, get your compression checked. Its probabaly pretty high, in the 220's or something like that. Mine was measured at 220-225 across all 4 cylinders. I run a 15.6 (with 250lbs weight reduction) with my cai, udp, hi-flo cat, and greddy catback. The member "1tuffrs" also had a freakishly fast car. he was running a 15.7 (i think) with just intake and exhaust

 

[Seanthaplaya]

wow thats kewl i just have a fast car does anyone want to buy it stock i just bought a gst for 1200.00 its a 98 with 66k miles 5spd

 

[Tallen]

You got a good deal...does the engine of the car make wierd rattling sounds? does the clutch pedal stick to the floor on left turns?

 

[Seanthaplaya]

the car does make a strange rattling noise its almost like a whistle sounds exactly like a turbo but with a whistle and the clutch does have to be mashed to the floor and it lets out loosely