A few missing bolts.

[mustbedejavu]

Hey guys this is my first post and I had an emergency question, I've been searching but can't find a clear part number or place to order a replacement. I would even buy some grade 10 bolts if I had the length and thread pitch. I am looking for the front and rear motor mount bolts for my 1990 Eagle Talon Tsi Awd. I have solid motormounts, I have had the car taken apart for about a year now after a huge mishape. I've lost the 2 bolts and nuts for the front and read motor mounts, If anyone could show me a place to order or an alternative it would be greatly appreciated.

Heres a pic from when it was running

You must be logged in to view this image or video.

 

[Cdc1221]

If you can check the width of the motor mount bracket, measure it and add a half inch and you have the bolt length. The pitch wont matter too much just match your nuts to the bolts. Also grade 8 should be fine. Dont want the bolts to be too hard

 

[mustbedejavu]

If you can check the width of the motor mount bracket, measure it and add a half inch and you have the bolt length. The pitch wont matter too much just match your nuts to the bolts. Also grade 8 should be fine. Dont want the bolts to be too hard

Well after some more searching i found the rear is a M10 x 1.25mm pitch x 110mm, if somebody could confirm it would be great, I'll prob. just pick up a bolt/nut and then just try it on the front to compare size and length.