Coolant pipe

[chadillac2820]

Is there an aftermarket coolant pipe that doesn't have the pipe that goes to the heater core and t body?

 

[bryanwheat]

No. You can weld up the pipe if you want though.

 

[chadillac2820]

I was considering that option. I was hoping for an easier solution.

 

[bryanwheat]

Why do you want to get rid of the heat? Do you drive this car on the street? You will regret it when your windows are fogging up.

 

[92AWDHX40]

I would just keep it open just in case you need some heat, ya never know even in my home state of ga, just in case, unless your headed to the speedway down there, only.

 

[chadillac2820]

Yea this car probably won't see the street.

 

[xlMcMlx DsM]

I cut mine off about an inch or so from the bigger pipe, clamped it shut in a vise then welded it. Worked great!

 

[rommel rojasgsx]

That is the easy way, the cheap way. The dsm way .Welding it shut.

 

[chadillac2820]

I don't have a tig

 

[chadillac2820]

Would a MIG on low setting work? It looks as though the material will burn away easily.

 

[BogusSVO]

You may be able to flatten it and fold it twice then braze it closed. I have done this method on the ford EGR cross over pipe on the back of the heads.

 

[rommel rojasgsx]

Just loop them then,but how much can it be to have this welded. $20-30 ?? I had mine done but not sure how much it was since i had a few other things done for my holset

 

[xlMcMlx DsM]

Would a MIG on low setting work? It looks as though the material will burn away easily.

I used a Flux-cored MIG. Worked perfect! It's a steel pipe.