The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

4G64LR or destroke 4G642.2

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thilaksharma

15+ Year Contributor
310
12
Jul 3, 2006
Evo City, Asia
Hi guys ,

I would like your opions for a suitable engine for Circuit track, I am not gonna go high on HP , below are the stuff I do have in hand but I would just like your opinions on it.

4G64 Block
Wiseco HD 10.5:1 CR , 86.5 Stock bore stroker pistons , short skirts
100mm crank OEM
Howard 156mm conrods
Kelford 272's
Head job done professionally with stock valves, 3 angle cuts, ported n polished
GT3076 T3 .82 Divided


I have another choice which is to use these below which means sell my unused stuff and get these below
K1 156mm Lightweight rods
Mahle 4032 lightweight stroker piston
GSC S2 Cams
Ferrea 1mm oversized valves
or even a 94mm crank

I am only aiming for about 450whp on the DJ wit E98 fuel , I do believe the HKS CT Time attack car runs a 2.3L 63 and cyberevo runs a 2.3L too , Magnus recommends the 4g64LR to be revved up to 8500rpms any reason why these lower revving machines are a choice or is it just a personal flavour.
 
Hi guys ,

I would like your opions for a suitable engine for Circuit track, I am not gonna go high on HP , below are the stuff I do have in hand but I would just like your opinions on it.

4G64 Block
Wiseco HD 10.5:1 CR , 86.5 Stock bore stroker pistons , short skirts
100mm crank OEM
Howard 156mm conrods
Kelford 272's
Head job done professionally with stock valves, 3 angle cuts, ported n polished
GT3076 T3 .82 Divided


I have another choice which is to use these below which means sell my unused stuff and get these below
K1 156mm Lightweight rods
Mahle 4032 lightweight stroker piston
GSC S2 Cams
Ferrea 1mm oversized valves
or even a 94mm crank

I am only aiming for about 450whp on the DJ wit E98 fuel , I do believe the HKS CT Time attack car runs a 2.3L 63 and cyberevo runs a 2.3L too , Magnus recommends the 4g64LR to be revved up to 8500rpms any reason why these lower revving machines are a choice or is it just a personal flavour.

It's because torque is what wins races. Not peak hp numbers. Stick with what you already have. It will get you where you want.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top