[RESOLVED] charge to hone the cylinder walls and polish the crank

[mattspyder]

Im look to see if anyone out there knows a rough price that the machine shop would charge to hone the cylinder walls and polish the crank.

 

[all_motor_mike]

like a deglazing hone? that shouldnt be much more than 50.00 or so, about the crank polishing......... i dont know ive never been down that road yet. everybodies pricing will be different though.


AMM

 

[stockfornow]

It all depends on a machine shop. But I would say not more than $150 for both, and it's tops! Because I remeber that boring and honing is like $17 per hole, but you have to only hone, means cheaper, which in fact you can do yourself, grind and polish a crank is $100, to polish a crank should be cheaper. These are the prices that I got from my local machine shop. Good luck!

 

[mattspyder]

just called AMS out of milwaukee and they would charge 55 for hone and 35 to polish the crank
not bad

 

[GS-T_Newboost]

my local machine shop charged my buddy 50 to polish his crank but as said price vary

 

[turboglenn]

Around here it's 25 per hole to bore, so a hone only should be cheaper. AS for crank polishing, i believe i paid about 60 bucks for that, but it was blended in with resizing the mains for ARP bolts at the same time and some other little stuff, so i can't be sure that hte 60 was just the polish by it's self. That was about 4 years ago.

 

[Purevil]

A local shop here quoted me $44 to hone and $28 for a polish.

 

[95blackGsTurbo]

Damn you guys are expensive. I only paid $40 for boring and $20 to polish the crank. And that was at the busiest, most highly recommended machine shop in the valley.

 

[JFZERO ECLIPSE]

I'm paying 45 dollars to polish my 7-bolt crank....Still gotta hone the block yet...

 

[eclipse08]

Im getting my wifes car done right now and to hone the block is $50, polishing the crank is $30. So it seems about $80-$100 is the general price range, it just varies a little from shop to shop.