Ultimate 6 bolt setup pros help only

[Boosted2gGsX]

Hey whats up all, I'm going to be building an awsome 6 bolt heres what it consists of a brand new stage 5 head from sbr wit 272 (hks) and hks adj timmin gears, The block id gonan be the sbr stage 2 or 3 2.0 motor but i have a ? bout that. should i go wit the 2.3,2.4.2.1 destroked i want a street legal car still and i have the money but i want a beast car and snr says the 2.0 is a beast either way. it has Aries rods .20 over ballenc ed and lightened crank and crower rods. is this a good setup for beast 1/4 mile numbers im trying for low 10's wit a fp green or red 720cc injectors coil on plug 3' maf 3' exhaust wit hks ssq bov and tial waste gate and 02 dump and mabye nos but dont incluse that in the 1/4 time. I have a nice fmic now and i have a 95 gst tre trasnny wit lsd i have the afc and a electronic b/c im gonna needim to get a data logger and im thinkin of stand alone fuel so im jsut wondering what you guys think like the know people like dsmjim and all the wisemen i need 2 know asap! theres are prolly a lot of stuff im missing if i am please put it in the post cuz i will be printin it out and making my desions off yours thanks!!

 

[iwantawd]

sweet mary mother of god

 

[Fattie92]

First off, learn how to type! This is a forum, not some chat room where your talking to your "homies." If you want a serious discussion about building a high performance engine, Then your going to have to do some more research before posting. There are numerous threads out there about building motors, stroking motors, turbos, fuel management, EVERYTHING. Once it looks like you took your time to research everything, and then type it out all nice and neat where others can read it without getting a headache, then the discusion may begin. But until then, go back to English class.

 

[Burnett03]

Hey whats up all, I'm going to be building an awsome 6 bolt heres what it consists of a brand new stage 5 head from sbr wit 272 (hks) and hks adj timmin gears, The block id gonan be the sbr stage 2 or 3 2.0 motor but i have a ? bout that. should i go wit the 2.3,2.4.2.1 destroked i want a street legal car still and i have the money but i want a beast car and snr says the 2.0 is a beast either way. it has Aries rods .20 over ballenc ed and lightened crank and crower rods. is this a good setup for beast 1/4 mile numbers im trying for low 10's wit a fp green or red 720cc injectors coil on plug 3' maf 3' exhaust wit hks ssq bov and tial waste gate and 02 dump and mabye nos but dont incluse that in the 1/4 time. I have a nice fmic now and i have a 95 gst tre trasnny wit lsd i have the afc and a electronic b/c im gonna needim to get a data logger and im thinkin of stand alone fuel so im jsut wondering what you guys think like the know people like dsmjim and all the wisemen i need 2 know asap! theres are prolly a lot of stuff im missing if i am please put it in the post cuz i will be printin it out and making my desions off yours thanks!!

you got the nerve to title your thread "pro's only" but you cant even spell and type correctly? 2.1 liter?

 

[2K2Civic]

2.1 liter?

Ever heard of a destroked 2.4

 

[arash15]

Hey whats up all, I'm going to be building an awsome 6 bolt heres what it consists of a brand new stage 5 head from sbr wit 272 (hks) and hks adj timmin gears, The block id gonan be the sbr stage 2 or 3 2.0 motor but i have a ? bout that. should i go wit the 2.3,2.4.2.1 destroked i want a street legal car still and i have the money but i want a beast car and snr says the 2.0 is a beast either way. it has Aries rods .20 over ballenc ed and lightened crank and crower rods. is this a good setup for beast 1/4 mile numbers im trying for low 10's wit a fp green or red 720cc injectors coil on plug 3' maf 3' exhaust wit hks ssq bov and tial waste gate and 02 dump and mabye nos but dont incluse that in the 1/4 time. I have a nice fmic now and i have a 95 gst tre trasnny wit lsd i have the afc and a electronic b/c im gonna needim to get a data logger and im thinkin of stand alone fuel so im jsut wondering what you guys think like the know people like dsmjim and all the wisemen i need 2 know asap! theres are prolly a lot of stuff im missing if i am please put it in the post cuz i will be printin it out and making my desions off yours thanks!!

use some commas man. my head is spinnin. but any type of displacement you go for, the crower rods will be more than enough, they will take a HUGE beating before they blow. you could drop 10 sec. slips with a setup like that, BUT put lots of time into TUNING it. and lets hope you could drive better than you type.

 

[Burnett03]

Ever heard of a destroked 2.4

ever heard of why bother? get a 2.0 or a 2.4

 

[Lunch_Box]

ever heard of why bother? get a 2.0 or a 2.4

Because you gain some displacement, high reving engine, best rod to stroke ratio if you use magnus long rods.

 

[Suparata]

Even though I can understand everybody’s frustration (maybe a little bit of envy too), we all need to back off and let the moderators take care of this.
Boosted is new to this site and looks like he is really anxious to run 10s but he won’t get far in getting answers if he doesn’t learn how and what to ask for.
I believe the first thing you should do if you don’t know what you need is ask your engine builder what’s best for you and then, if you want to confirm that it is in fact what you need, you can ask for help.
Let’s not make this into another “this one is better than that one” since any of the combinations mentioned can run 10s. But that might not be the only goal Boosted set for his car.

 

[Burnett03]

Because you gain some displacement, high reving engine, best rod to stroke ratio if you use magnus long rods.

i understand that, but i dont see the point in just building a 2.3 liter to get even more displacement.. sure the reving ability isnt as great but who cares.. we dont need to rev to the moon on these cars to hit vtec.

 

[Boosted2gGsX]

ok first off i dont need your help and i sware when im done ill beast u all. O)O lets go trash this thread and second im not talking to my hommies. I was asking serious questions and if you you dont have nething to say then dont say it. this is why people dont ask you idiots for help nemore cuz every1 has something to say we all make mistakes in spelling and all so what ever have a nice F*ckin day A$$Hooles!

 

[Boosted2gGsX]

Burnett03

hers the link Smart A$$

http://slowboyracing.com/shop.php?sid=&cat=2536

P.S i may not be a great speller or typer but i am a beast mechanic, so if u guys wanna be ### bout my typin so be it and thanks to the kid who didnt trash me (Suparata,arash15) thanks. I am a engine builder and all i was jsut asking for the guys who built beast motors and all if that was a good setup and waht u think i can run i hate gettin trashed i just started my shop up and finally got the time and money for the eclipse!

 

[iwantawd]

ok first off i dont need your help

ok then you wont get it

and i sware when im done ill beast u all.

im sure you will

I was asking serious questions

really i couldnt tell

get off your high horse "beast mechanic"

-the asshole

 

[GILZTSIAWD]

If you are an engine builder and such a beast mechanic why in the heck are you buying a motor and head from sbr?

 

[ISUJakey]

Did I catch a 9'er in all that?

Anyways, thread reported. A little punctuation, post structure, and grammar improvement by specific people might back this Advanced Tech thread worthwhile.

 

[Fattie92]

Whats a Beast? Is that some kind of Croatian car company? Or is that the new "ill" term to use?

If your such a "beast" mechanic and engine builder, then why are you asking these questions? You should already know the answers there "Beast!"

Since when was there a video game where you can open up your own shop? If you just opened up a shop, then i feel sorry for anyone that goes there. But to be completely honest with you, you come off like some 12yr old kid. This thread would have been taken way more seriously if it didn't look like you were some punk kid that just jumped onto the bandwagon. There is a button right next to the "Submit Reply" that is called "Spell Check." And as for your typing, you find the letter you want, and then press it once for each time you want that letter to show up. You then glance at the screen to make sure you did it right,... not that hard. Also, Hooked On Phonics is a GREAT program!

Good luck with what you do!

 

[Defiant]

You must be logged in to view this image or video.

Ah, that was fun.